Quad lift table 1000 kg
High-quality hydraulic ramps for quads in Cyprus for enthusiasts and professionals.
The TÜV-certified lift does what it promises and is a true Hercules among Quad lifts. It is equipped with a high-performance unit that allows 1000 kilos to be lifted to the maximum height of 1200 mm in just 30 seconds.
1000 kg load capacity: endless power! Even in the lowest position, the Powerlift 1000 develops the full power of a whopping 1000 kg due to the powerful cylinder. The lifting time is only 30 seconds. Roller-bearing lifting table: Even under full load, smooth running is guaranteed thanks to the roller guide of the lifting table. Compared to sliding pieces, friction is kept low. The rollers run more smoothly and don't wear out as quickly.
Mechanical supports: The Powerlift 1000 is equipped with mechanical supports in 6 different heights: 650 mm, 800 mm, 900 mm, 1000 mm, 1100 mm, 1200 mm. When the appropriate working height is reached, the platform is lowered to the next support. This reduces the load on the hydraulics and your stage will thank you with a long service life!
Joystick: The entire control of the Powerlift 1000 is controlled via a practical joystick. Thanks to the magnetic back, the joystick can be attached anywhere on the lift. This means it is always ready to hand when needed. Wheel holder for the front wheel: The Powerlift 1000 comes with a front wheel holder as standard, at no extra charge, which can be attached to the lifting table. This allows the motorcycle to stand securely.
Safety eyelets: The 4 safety eyelets on the platform provide your seat belts with perfect support, so you can concentrate on your work with peace of mind. Lift table flaps: Whether it's changing the rear wheel, brake maintenance or chain cleaning... there are many repair and maintenance jobs that require freely accessible work on the rear wheel. The Powerlift has a flap at each end of the lifting table so that you can do your full screwdriving. The wheel holder included in delivery can be attached to one of these flaps.
Checker plate on the platform: To ensure that the lifting table remains beautiful and does not get scratched, the Powerlift 1000 has a robust and durable checker plate in the middle. This means you can confidently use the center stand of your motorcycle.
Access ramps: The Powerlift is delivered including access plates. These are dimensioned relatively long so that the approach angle is not too steep. The access ramps are hooked onto the lifting table and can be removed just as quickly with one hand.
Grease nipples: The Powerlift 1000 has grease nipples at all important points so that the load points can be lubricated not only optimally but also without much effort. The time required for maintenance is minimal.
265 kg dead weight: mass with class! In order to give the lift an absolutely firm and solid footing even when it is at full capacity, the material was not skimped on, but was cut out! A total weight of 265 kg gives the Powerlift a secure stand. You'll love it when your motorcycle is raised 1200 mm and you can screw safely.
Σχετικές αγγελίες
Έλεγχος για ενημερώσεις στα Αγαπημένα