Denon pma-500v intgrated aamplifer
- Condition: Used
Specs:
Number of inputs: 7
Phono:
MM 2.5 mV, 47 kOhm
MC 200 µV, 100 ohms
CD, Aux1, Aux2, Tuner, Tape1, Tape2: 150 mV, 30 kOhm
Number of outputs: 3
Tape1, Tape2: 150 mV
Pre-out
Technical specifications
Continuous output
8 Ohm: 2x 80 W (<0.05%, 10Hz - 20kHz)
4 Ohm: 2x 130 W (1%, 1 kHz, DIN)
Total harmonic distortion:
0.007% (20Hz - 20kHz, at -3dB nominal power at 8Ohm)
0.003% 1kHz (at nominal output power at 8 ohms)
Damping factor:
Power bandwidth: 5 Hz-80 kHz (8 ohms, 0.1% THD)
Frequency response: 4 Hz-150 kHz (+0 dB, -3 dB, 1 W)
Output impedance 0.1 ohm (1 kHz)
Signal-to-noise ratio:
Phono:
MM: 88 dB (input terminals short-circuited for 5mV)
MC: 68 dB (input terminals for 500µV short-circuited)
CD, aux, tuner, tape: 105 dB (input terminals short-circuited)
Stereo channel separation:
Tone control:
Bass:% plusmn; 10 dB (100 Hz)
Treble:% plusmn; 10 dB (10 kHz)
Loudness: +7 dB (100 Hz), + 6dB (10 kHz)
Subsonic: 16 kHz, 12 dB / oct
Special equipment
The AUX inputs can also switch a video signal (2x video composite in to 1x video composite out)
Mono switch (not used for bridging, but only to check the loudspeaker phase position)
8 speaker outputs (4x A, 4x B, A + B)
Separate pre- and final stage
Excellent Condition!!
Without further accessories!
Similar ads
Check for updates in favorites section