Technics su-7 amplifier, rs-5 cassette deck, st-3 tuner set
- None: Amplifiers
- None: Used
Form Integrated amplifier
SP out overall characteristic>
Effective output:50W+50W (8ohms)
THD 0.005% (Output-power-3dB, 1kHz)
Frequency characteristic 10Hz - -140kHz three dB
SN ratio (IHF-A) 99dB
Remains noise 0.7mV
Dumping factor 30 (8ohms)
Load impedance main or remote: 8ohms - 16ohms
Input sensitivity/impedance Phono man month: 2.5mV / 47kohm
Tuner, Aux, Tape:150mV /, 27kohm
Phono SN ratio man month: 81dB (2.5mV input)
Phono frequency characteristic 20Hz - 20kHz, RIAA�}0.8dB
Tone control Bass: �}10dB (50Hz)
Treble: �}10dB (20kHz)
Power source AC100V, 50Hz/60Hz
Power consumption 87W
Dimensions Width 315x height 98.9x depth of 248mm
Weight:5.0kg
Specifications for RS-5 tape deck:
Type: 2-head, single compact cassette deck
Track System: 4-track, 2-channel stereo
Tape Speed: 4.8 cm/s
Heads: 1 x record/playback, 1 x erase
Motor: electrical dc governor
Tape Type: type I, CrO2, Metal
Noise Reduction: B
Frequency Response: 20Hz to 17kHz (Metal tape)
Signal to Noise Ratio: 67dB (dolby B)
Wow and Flutter: 0.05%
Input: 60mV (line), 0.25mV (mic)
Output: 0.4V (line)
Dimensions: 315 x 124 x 248mm
Weight: 3.2kg
Finish:silver
Specifications for ST-3 tuner:
An FM/AM tuner with a body of 315 mm width and 43.6 mm panel height incorporating Technics tuner technology.
The front end has a high sensitivity design that employs a 4-pole junction FET in the RF stage.
In addition, a ceramic filter is used in the IF stage to increase selectivity, and a high SN ratio is realized by wide-band quadrature detection.
The MPX for the MPX demodulation circuit, and demodulation is performed by double balanced and switching circuit to realize excellent stereo separation.
pped with an AFC (Automatic Frequency Control) circuit for more stable reception.
Equipped with a large flywheel for smooth tuning.
The guide with red LED is used for easy channel selection.
The AM tuner section has a complete IC structure and is designed to be resistant to spurious interference by combining it with a newly developed low-impedance ferrite antenna.
A direct connector is used for connection.
Похожие объявления
Следите за обновлениями в разделе "Избранное"