Motorcycle lift table 680 kg
High-quality hydraulic ramps for motorbikes and quads in Cyprus for enthusiasts and professionals.
Our motorcycle lift with a load capacity of 680 kg allows you to lift and work on your bike effortlessly. Whether you're driving a heavyweight or a lightweight, our lift puts you in full control. Trust the robust construction and high load capacity to maintain your motorcycle safely and comfortably.
Wheel clamp: With the wheel clamp, the front wheel is fixed using a hand crank so that the motorcycle stands securely upright. This clamp holds wheel widths from 3 cm to 20 cm and therefore covers almost everything. The optimal position for repairs, or if you want to jack up the motorcycle with a scissor jack.
Load capacity: With an extremely strong 680 kg load capacity, the POWERLIFT680 is perfectly prepared for all challenges. Healthy working height: At 85 cm high, the POWERLIFT680 reaches a working height at which almost all work can be done comfortably. Your back and knees will thank you.
Wide ramp plate: Especially when a motorcycle is pushed onto the lift using manpower, you don't always get the middle of the ramp. Thanks to the access ramp across the entire width of the lifting table, this is no longer a problem. If you want to work on the rear wheel or rear, you can simply unhook the ramp in seconds and have optimal access to the bike. Safety catches: As soon as the correct working height is found, the platform can be lowered into the next safety catch. This reduces the load on the hydraulics and allows you to have fun with the stage for a long time. These are available in the following heights: 80 cm, 72 cm, 63 cm, 52 cm and 36 cm.
Double-Action Pump: This pump has a special, double feature. It can be operated pneumatically by connecting to a compressor, but also completely manually, as a quick-stroke foot pump that is independent of energy sources. The flexible hydraulic hose has a length of 100 cm. No matter what requirements you have in your workshop, the POWERLIFT680 is prepared for them.
Platform: To prevent slipping on the platform, we gave the POWERLIFT680 a checker plate platform. Even if the tires are wet, you have the best possible grip here.
Rear wheel flap: For most work on the rear wheel, it is important that the wheel is freely accessible and rotatable. This recess has a size of 31 cm x 50 cm. You won't want to be without the rear wheel flap anymore.
Similar ads
Check for updates in favorites section